A homeowner in Rehobeth, MD asked us to give their home a cleaner, more finished look. They also needed more privacy on street-facing windows without giving up the natural light that fills the house. With multiple windows to cover, every shutter had to fit exactly and line up from window to window.

Project at a glance

Location: Rehobeth, MD (Somerset County)
Windows: Multiple windows and a patio door
Shutters: 10 custom-fit interior shutters
Rooms: Living room, dining room, bedrooms, study

The challenge: privacy and light on five double windows

The home sits close to the street, so the front rooms needed privacy. But the homeowner didn’t want heavy coverings that would darken the house. Multiple windows side by side add a second challenge: any size difference or louver misalignment shows immediately.

The solution: two made-to-measure shutters per window

We measured each window opening individually and built a separate shutter for each one, 10 in total. Each was made to fit its own frame, so the louvers, rails, and edges line up from window to window when the shutters are closed. Learn more about our custom shutters.

The louvers tilt to control light and privacy through the day. Open them for full daylight and the view, angle them to keep out street views while letting light in, or close them for full privacy at night.

Project photos

Precision Fitted Shutters
Closed for privacy on a street-facing bedroom window
Fitted Shutters Living Room
Living room windows fitted with custom shutters
Fitted Shutters Door
A custom shutter fitted to a door
Fitted Shutters Bedroom 1
Custom-fit shutters on the second bedroom window
Fitted Shutters 2nd Bedroom
Custom-fit shutters for a double window
Fitted Shutters Dining
Louvers tilted open for daylight in the dining room

Shutters for multiple windows: what to decide

If you’re planning shutters for multiple windows, these are the choices we walk through with every homeowner:

  • One shutter per window or one across several: Fitting each window separately, as in this project, keeps panels lighter and keeps louvers level from window to window. A single wide unit or a bifold panel can work on some openings.
  • Inside or outside mount: Deep window frames allow an inside mount for a built-in look. Shallow frames often need an outside mount.
  • Louver size: Larger louvers give a wider view and more light when open. Smaller louvers suit smaller windows and a more traditional look.
  • Tilt control: A front tilt rod is classic. A hidden tilt rod gives a cleaner view.
  • Material: Wood is lighter for wide panels. Composite and vinyl hold up better in humid rooms. See wood vs. composite shutters.

We measure every opening in person during a free consultation, so you don’t have to guess at sizes.

The result

Every window now shares one consistent, finished look. The homeowner controls privacy and light room by room, with louvers that line up from window to window.

Shutters across Rehobeth and the Lower Shore

We install custom shutters, shades, and blinds in Rehobeth, Pocomoke City, and across Worcester County. See our window treatments or explore the different types of interior shutters.

Planning shutters for multiple windows?

We bring the showroom to you. Book a free in-home consultation and we’ll measure every window and show you samples at home.